Sesotec Raycon EX1 – Xray Control System

Product inspection system for slim and packaged products at moderate pricing

  • Hygienic, Industrial Design
  • Focus on Usability:
  • Best in class user interface
  • Best cleanability, maintainability
  • Easiest handling & installation
  • Easy decision!


The RAYCON EX1 product inspection system detects all contaminants that due to their density, chemical composition, or mechanical dimensions absorb X-rays better than the surrounding product. For example this applies to metal, glass, ceramic, and stone contaminants in food materials. The RAYCON system also detects some types of plastics (e.g. PVC, rubber) as well as other product defects (e.g. trapped air, filling level).

  • Inspection area: 220/120 (W x H)
  • Throughput: ~220 pcs./min. (product specific)
  • Detection capability starting from Ø 0,6 mm
  • 60W Low-Energy X-Ray generator
  • Highest operator safety due to low X-Ray emission < 0.5µSv/h
  • Total length of 800mm only
  • Modular and stable frame design allows easy transportation and safe installation
  • Ambient temperatures from 0°C to +40°C
  • IP 54 protection class
  • Reject system: signal only (for customer specific reject systems)

The product inspection system is equipped with a high-performance industry-type PC with real-time operating system and sophisticated visualisation software.

The system is operated by way of a 10“ – LCD monitor with touch-screen.

X-ray images are evaluated by means of a product-specific visualisation software. Contaminated or defective products are detected and separated.

Saving time for maintenance & cleaning due to:

  • Inclined surfaces, water flows off easily
  • Tool-less accessibility
  • Tool-less removal of curtains in less than 1 minute
  • Tool-less conveyor belt removal within 2 minutes

Drag & Drop menus
The operator receives a visual feedback instantly

  • Time saving

Menu guide
The operator is guided by the software through necessary steps of product setup or troubleshooting

  • Time saving

Autolearn with 5 product samples only

  • Startup in less than 2 minutes

Retrain for automatic sensitivity adjustment.

Software increases/decreases sensitivity automatically due to operators
command by just marking the x-ray image with fingers

  • Saves time consuming adjustments

    Request a Quote

    Please fill out the information below so that we can reach you. Our customer service representatives will get back to you as soon as possible.